Wind Alarm
email inquiry
■ AN2 anemometer + optional WD2 wind directions sensor required
■ Adjustable limits & delays
■ low power consumption
■ 1A NO/NC voltage free contacts
■ Optional flashing beacon and/or piezo alarm
The Monitor Sensors Wind Alarm Controller monitors the wind speed and optionally direction and operates an alarm relay when a programmable limts are breached. The relay is released after a second programmable period of time has elapsed. The controller has many adjustable settings.
A SPDT 1 Amp  relay provides volatge free contacts to operate external equipment. An external heavy duty relay or contactor is required to control a load such as a pump motor.
Specifications: · Powder coated aluminium case
Measurement range:
Accuracy:
Operational range:		 0 ... 55m/s  0 ... 360°
± 1%, ±0.5°
-20°C to +60°C 0% to 100%RH
Output options: · Monibus serial data ASCII format
· 1 Amp SPDT voltage free contacts
Power Supply:
Supply current:		 12-28 Vdc unregulated
6.2 mA active
Sensor weight: xxx grams
Dimensions: 150 W  x 300 L x 80 H mm
Mounting: 4 x 6 mm Ø holes in flange
Cable Details: Standard product has 4 m of cable to the rain gauge - other cable lengths may be ordered
Warranty: 12 months - full details can be found in the Monitor Sensors standard warranty document http://www.monitorsensors.com/docs/std_warranty.pdf
Pricing: contact sales@monitorsensors.com