|
SL5 |
200 Channel Data logger, 500,000 Readings, Includes CM2,
IB14 + CH6 |
|
AN2 |
Anemometer, 3 cup long arm, 0.2 - 50 metres/sec,
2.1m cable |
|
AN2-4 |
Anemometer Range 0.2 - 50 metres/sec with 4-20ma |
|
AN3 |
Anemometer, 3 cup short arm, 0.5 - 50 metres/sec,
2.1m cable, |
|
AN3-4 |
Anemometer Range 0.2 - 50 metres/sec with 4-20ma |
|
AN4 |
Anemometer, 3 cup, std. deviation, 0.2
- 50 m/sec, 2.1m cable, |
|
AN2U |
Anemometer, 3 cup, 10m wind run per pulse, 0.1 - 30 m/s, 2.1m cable |
|
AN7 |
Anemometer, 3 blade, Vertical Wind speed and std. deviation
output |
|
BP1 |
Barometric Pressure Sensor, 0.8m cable |
|
BP1-4 |
Barometric Pressure Sensor, 0.8m cable with 4-20ma |
|
HT1 |
Combined Temperature/Humidity sensor |
|
HT1-4 |
Combined Temperature/Humidity sensor, 4-20ma |
|
HU1 |
Relative Humidity Sensor, 0.8m cable |
|
HU1-4 |
Relative Humidity Sensor, 0.8m cable with 4-20ma |
|
WD2 |
Wind Direction Sensor, 2.1m cable, includes vane |
|
WD2-4 |
Wind Direction Sensor with 4-20ma |
|
WD3 |
Wind Direction Sensor w/sine & cosine o/put for sigma theta
calc (std deviation) |
|
WD4 |
Wind direction Sensor Angle and computed sigma theta, 2.1m
cable |
|
LW2 |
Leaf Wetness Sensor, 4m cable |
|
RD1 |
Rain Detector Sensor |
|
SM1 |
Soil Moisture Sensor, single channel, 1 gypsum block with 5
metre cable. |
|
SM1-4 |
Soil Moisture Sensor, with 4-20ma output |
|
SM2A |
2 sensor Gypsum block soil moisture sensor. (includes 2
gypsum blocks) |
|
SM3A |
3 sensor Gypsum block soil moisture sensor. (includes 3
gypsum blocks) |
|
SM4A |
4 sensor Gypsum block soil moisture sensor. (includes 4
gypsum blocks) |
|
SM4 |
Gypsum Block Interface - no gypsum block |
|
TA1 |
Air Temperature Sensor, 0.8m cable |
|
TA1-F |
Air Temperature Sensor, 2-10Hz TTL output, 0.8m cable
|
|
TA1-4 |
Air Temperature Sensor, 0.8m cable with 4-20ma |
|
TA2 |
Wet & Dry Bulb Temperature Sensor, Includes Bottles & Wicks,
0.8m cable |
|
TA4 |
Air Temperature Sensor 4 channel - Bowen Ratio System |
|
TB1 |
Black Globe Temperature Sensor, 4m cable |
|
TG1 |
Grass Temperature Sensor, includes stake, 4m cable |
|
TL1 |
Leaf Temperature Sensor, 4m cable |
|
TM4 |
4 Channel Temperature sensor. Requires 1 x TT2 temperature probe
per channel |
|
TS1 |
Soil Temperature Sensor, 4m cable |
|
TS1-4 |
Soil Temperature Sensor, 4m cable with 4-20ma |
|
TT2 |
Temperature tip for TM4 multi channel temperature sensor - 1 required per channel |
|
TT-4 |
Thermocouple Interface, 5m cable |
|
PR1 |
PAR cosine corrected Solar Radiation Sensor, 2m cable |
|
SR2 |
Solar Radiation Sensor, 2m cable |
|
SR2-4 |
Solar Radiation Sensor with 4-20 ma |
|
SR2-9 |
Solar Radiation Sensor with sunshine hours reading,2m cable. |
|
CN1R |
Net Pyranometer |
|
CN3 |
Heat Flux plate sensor + interface |
|
UV1 |
UVA sensor |
|
UV2 |
UVA+B sensor |
|
UV3 |
UVA+B+C sensor |
|
SF1 |
Sap flow interface |
|
SF2 |
Sap flow interface |
|
SV3 |
Sap velocity interface - size 30 |
|
SV4 |
Custom TDP - 4 shannel sap velocity interface - 5m cable
|
|
SV5 |
Sap velocity interface - size 50 |
|
SV8 |
Sap velocity interface - size 80 |
|
SV10 |
Sap velocity interface - size 100 |
|
LS1 |
Lightning Strike Sensor, low sensitivity, 1.0v/m, 2m cable |
|
LS2 |
Lightning Strike Sensor, medium sensitivity, 0.3v/m, 2m
cable |
|
LS3 |
Lightning Strike Sensor, high sensitivity, 0.1v/m, 2m cable |
|
RG1-1 |
Tipping Bucket Rain Gauge, 1.0 mm per tip, 8m cable, reed
switch |
|
RG2-1 |
Tipping Bucket Rain Gauge, 0.2 mm per tip, 8m cable, reed
switch |
|
RG5-1 |
Tipping Bucket Rain Gauge, 0.5 mm per tip, 8m cable, reed
switch |
|
RG1 |
Tipping Bucket Rain Gauge, 1.0 mm per tip, 8m cable |
|
RG2 |
Tipping Bucket Rain Gauge, 0.2 mm per tip, 8m cable |
|
RG5 |
Tipping Bucket Rain Gauge, 5mm per tip, 8m cable |
|
RS1 |
Rainfall Sentry Pump Controller, 1.0 mm (with Rain Gauge) |
|
RS2 |
Rainfall Sentry Pump Controller, 0.2 mm (with Rain Gauge) |
|
RS5 |
Rainfall Sentry Pump Controller, 0.5 mm (with Rain Gauge) |
|
EC1 |
Temp. Comp Electrical Conductivity Sensor, range 0 - 1000µS,
10m cable |
|
EC2 |
Temp. Comp Electrical Conductivity Sensor, range 0 - 2000µS,
10m cable |
|
EC3 |
Temp. Comp Electrical Conductivity Sensor, range 0 - 5000µS,
10m cable |
|
EC4 |
Temp. Comp Electrical Conductivity Sensor, range 0 -
10000µS, 10m cable |
|
EC5 |
Temp. Comp Electrical Conductivity Sensor, range 0 -
20000µS, 10m cable |
|
EC6 |
Temp. Comp Electrical Conductivity Sensor, range 0 -
50000µS, 10m cable |
|
EC7 |
Temp. Comp Electrical Conductivity Sensor, range 0 -
100000µS, 10m cable |
|
EC-F |
EC Sensor fertigaton pack - remote sensor |
|
WL1 |
Passive Pressure Water Level Sensor 0 - 1 m, 2m cable
|
|
WL2 |
Passive Pressure Water Level Sensor 0 - 2 ms, 5m cable |
|
WL3 |
Passive Pressure Water Level Sensor 0 - 5 ms, 10m cable
|
|
WL4 |
Passive Pressure Water Level Sensor 0 - 10 ms, 10m
cable |
|
WL5 |
Passive Pressure Water Level Sensor 0 - 20 ms, 10m
cable |
|
WL6 |
Passive Pressure Water Level Sensor 0 - 50 ms, 10m
cable |
|
WL7 |
Passive Pressure Water Level sensor 0-200 mm. For use with
evaporation pan |
|
WL8 |
Passive Pressure Water Level Sensor 0-500 mm. For use with
evaporation pan |
|
EV1 |
A Class Evap. Pan, level sensor, logger - manual
refill. |
|
EV2 |
A Class Evap. Pan, level sensor, logger - auto
refill. requires external water supply |
|
EV3 |
A Class Evap. Pan, level sensor, auto refill - to fit to
existing logger |
|
EV4 |
A Class Evap. Pan, level sensor. manual refill - to fit to
existing logger |
|
EV1-1 |
Upgrade to auto refill |
|
EV1-3 |
Upgrade to manual refill |
|
EV1-4 |
Upgrade to auto refill + logger |
|
EV1-2 |
Upgrade to manual refill with stilling well, logger &
accessories |
|
700100 |
Evaporation Pan Only |
|
LA1 |
Lightning Strike Control unit. |
|
RA1 |
Rain Alarm Unit NO/NC Relay mm, no Beacon or Alarm |
|
RA2 |
Rain Alarm Unit NO/NC Relay mm, with Beacon |
|
RA3 |
Rain Alarm Unit NO/NC Relay mm. with Alarm |
|
RA4 |
Rain Alarm Unit NO/NC Relay mm. with Beacon + Alarm |
|
WA1-1 |
Wind Alarm Unit NO/NC Relay kph, no Beacon or Alarm |
|
WA1-2 |
Wind Alarm Unit NO/NC Relay m/s, no Beacon or Alarm |
|
WA1-3 |
Wind Alarm Unit NO/NC Relay knots, no Beacon or Alarm |
|
WA2-1 |
Wind Alarm Unit NO/NC Relay kph, with Beacon |
|
WA2-2 |
Wind Alarm Unit NO/NC Relay, m/s with Beacon |
|
WA2-3 |
Wind Alarm Unit NO/NC Relay, knots with Beacon |
|
WA3-1 |
Wind Alarm Unit NO/NC Relay, kph with Alarm |
|
WA3-2 |
Wind Alarm Unit NO/NC Relay, m/s with Alarm |
|
WA3-3 |
Wind Alarm Unit NO/NC Relay, knots with Alarm |
|
WA4-1 |
Wind Alarm Unit NO/NC Relay, kph with Beacon + Alarm |
|
WA4-2 |
Wind Alarm Unit NO/NC Relay, m/s with Beacon + Alarm |
|
WA4-3 |
Wind Alarm Unit NO/NC Relay, knots with Beacon + Alarm |
|
MS1 |
SL5-1L 200 Ch Logger, AN2, WD2, TA1, HU1, SR2, SP5, MK1,
LH1, SS5, MM5-1 |
|
MS2 |
MS1 with rain gauge |
|
MS3 |
MS2 with TS1, BP1 and choice of PR1/SM1 |
|
MS-FS |
Portable Stn Fire Services 450mm cross arm, AN2, WD2, HU1, TA1,
LH1, SS4, MM5-2 |
|
Includes SL5-1L & Accessories. |
|
BL1 |
Gypsum Block - Flat Type 60 x 60 x12mm, 2m cable |
|
BL2 |
Gypsum Block - Cylinder Type 25 x 50mm, 2m cable |
|
CS1 |
Calcium Silicate Soil Moisture Block, 2m cable |
|
IB14 |
Interface Bus Bar - 14 Channel |
|
LH1 |
Lockable Data Logger Housing (small) |
|
LH3 |
Lockable Data Logger Housing (medium) |
|
LH5 |
Lockable Data Logger Housing (large) |
|
SS1 |
Sensor Shelter (to suit 1 sensor) |
|
SS4 |
Sensor Shelter (to suit 3 sensors) |
|
SS5 |
Sensor Shelter (to suit 2 sensors) |
|
SS6 |
Aspirated Sensor Shelter (to suit 3 sensors) |
|
MM5 |
2m Metal Mast with Cross Arm & In-ground Mount - 900mm |
|
MM5-1 |
2m Metal Mast with 900mm Cross Arm & MK7 free standing
base |
|
MM8 |
Metal Mast with LH3 |
|
MM10 |
Metal Mast 5M with Cross Arm, & guy wires |
|
MM11 |
Metal Mast with LH5 |
|
MM12 |
10m Hinged Aluminium mast with cross arm, & guy wires |
|
MK5 |
Upper Mast - 900mm with joining sleeve |
|
MK6 |
Lower Mast - 900mm |
|
MK7 |
Free Standing Base Assembly (to suit 2m mast) |
|
MK9 |
Cross Arm Assembly |
|
MK10 |
1m Mast extension |
|
MK11 |
Side Mounting Arm for Sensors |
|
MK15 |
Side Mounting Arm (2 piece) for Black Globe |
|
MK12 |
900 mm in ground mount for 2 metre mast. |
|
MK20 |
Mounting Bracket for anemometer |
|
GUY5 |
Guy Wire Kit (total wire length 20ms) |
|
GUY10 |
Guy Wire Kit (total wire length 55ms) To suit a 10 metre
mast. |
|
MK1 |
Solar Panel Mounting Kit (5 Watts) to suit 2m mast |
|
MK2 |
Solar Panel Mounting Kit (10 Watts) to suit 2m mast |
|
MK2A |
Solar Panel Field Mounting Kit (10 Watts) |
|
MK3 |
Solar Panel Mounting Kit (5 Watts) to suit 10m mast |
|
MK4 |
Solar Panel Mounting Kit (10 Watts) to suit 10m mast |
|
MK17 |
Solar Panel Mounting Kit (40 Watts) |
|
MK24 |
Solar Panel mounting kit. (20 Watt) |
|
MK24A |
Solar Panel Field Mounting Kit (20 Watts) |
|
MK21 |
CN1R Mounting Bracket |
|
SP5 |
Solar Panel, 5 Watt |
|
SP10 |
Solar Panel, 10 Watt |
|
SP20 |
Solar Panel, 20 Watt |
|
SP40 |
Solar Panel, 40 Watt |
|
C01 |
Precision current to µSmart Converter, unipolar, 2m
cable |
|
C02 |
Precision current to µSmart Converter, differential-non isolated,
2 m/c |
|
C03 |
Isolated current to µSmart Converter, unipolar isolated to
1.5Kv |
|
C04 |
Isolated current to µSmart Converter, bipolar |
|
FO1 |
Precision Freq to µSmart Converter, single, 2m cable |
|
FO2 |
Precision Freq to µSmart Converter, differential non isolated, 2
m/c |
|
FO3 |
Isolated Freq to µSmart Converter, Unipolar isolated to
1.5Kv |
|
FO4 |
Isolated Frequency to µSmart series Converter, Bipolar |
|
LCD1 |
Single channel LCD real time display - Bus Reader with
CB-LCD |
|
LO8 |
Logic Control + Relay |
|
RG9 |
Rain gauge switchbox with uSmart Interface |
|
SI8 |
Monibus to RS232 Interface with power supply for Sensors |
|
SI-8 |
Monibus to RS232 Interface |
|
SI-RG |
µSmart Interface module for Tipping Bucket Rain Gauge |
|
VC1-D |
Battery Condition Monitor - 2 Channel |
|
VC1-I |
Battery Condition Monitor - 3 Channel |
|
VO1 |
Precision Voltage to µSmart series Converter, unipolar, 2m
cable |
|
VO2 |
Precision Voltage to µSmart series Converter, differential non-isolated,
2m cable |
|
VO3 |
Isolated Voltage to µSmart series Converter, unipolar isolated to
1.5Kv |
|
VO4 |
Isolated Voltage to µSmart series Converter, Bipolar |
|
ANT1 |
Antenna CDMA/GSM - MSW63 |
|
ANT2 |
Antenna CDMA - 3dB Industrial |
|
ANT3 |
Antenna GSM - 3dB Industrial |
|
ANT4 |
Antenna CDMA - 5dB Industrial |
|
ANT5 |
Antenna GSM - 5dB Industrial |
|
ANT6 |
Antenna & Bracket CDMA - 3dB Industrial |
|
ANT7 |
Antenna & Bracket GSM - 3dB Industrial |
|
ANT8 |
Antenna & Bracket CDMA - 5dB Industrial |
|
ANT9 |
Antenna & Bracket GSM - 5dB Industrial |
|
CDM1 |
Modem CDMA Intercel Sam |
|
CDM2 |
Modem Maxon MM-5100 |
|
GPS1 |
Garmin GPS Module with Antenna |
|
GSM |
Modem Fastrack M1306B |
|
GSM1 |
Modem GT47 - Sony Ericcson |
|
SAT |
Modem GlobalStar Satellite |
|
106061 |
Hello Sena Device (TCP/1P Interface) |
|
DM4 |
Removable logger memory module, 500,000 Readings |
|
DS1 |
Docking station to download data from DM4 to PC |
|
025100 |
BT1 - 3.4AH 6V Sealed Lead Acid Battery |
|
025101 |
BT2 - 7AH 6V Sealed Lead Acid Battery |
|
025103 |
BT4 - 42AH 12V Sealed Lead Acid Battery |
|
025104 |
BT5 - 65AH 12V Sealed Lead Acid Battery |
|
CH2 |
Battery Charger, 240 AC - 6v DC for recharging batteries ** |
|
CH3 |
240VAC - 12VDC 4 amp Power Supply - Australia only |
|
CH6 |
240VAC/12VDC 1 amp power supply - Australia only |
|
CH7 |
12v (110v) 2.5a (C2CF) - Export IEC socket |
|
CH7A |
12v (110v) 2.5a (C3CF) - Bus |
|
CH8 |
13.5V 1.8a (C2CF) - Australia only |
|
026000 |
C2CF- 2 Pin Female Cable Mount Connxal |
|
026001 |
C2CM - 2 Pin Male Cable Mount Connxal |
|
026002 |
C2PM - 2 Pin Male Panel Mount Connxal |
|
026003 |
C3CF - 3 Pin Female Cable Mount Connxal |
|
026004 |
C3CM - 3 Pin Male Cable Mount Connxal |
|
026005 |
C3PM - 3 Pin Male Panel Mount Connxal |
|
026006 |
C4CF - 4 Pin Female Cable Mount Connxal |
|
026007 |
C4CM - 4 Pin Male Cable Mount Connxal |
|
026008 |
C4PM - 4 Pin Male Panel Mount Connxal |
|
026009 |
C6CF - 6 Pin Female Cable Mount Connxal |
|
026010 |
C6CFL - 6 Pin Female Cable Mount Connxal |
|
026011 |
C6CMS - 6 Pin Male Cable Mount Connxal |
|
026012 |
C6PM - 6 Pin Male Panel Mount Connxal |
|
045000 |
Reservoir Bottle (400mls) for wet bulb |
|
045002 |
Wet Bulb Wick (to suit TA2), 1 metre length |
|
046026 |
Rain Gauge filter assembly |
|
860006D |
Rain gauge reed switch assembly |
|
CF1 |
Instrumentation Shipping Case, foam lined |
|
LP1 |
Lightning Strike Protector |
|
950001 |
Anemometer Body |
|
950002 |
Wind Direction Body |
|
950050 |
Wind Vane to suit WD2/3 |
|
950052 |
Anemometer Cups - Long Arm |
|
950053 |
Anemometer Cups - Short Arm |
|
CM2 |
Interface Cable, RS232 - DB9, 2m cable |
|
CM3 |
Modem to Logger Interface Cable, RS232 - DB25, 2m cable |
|
CM4 |
Modem to Logger Interface Cable, RS232 - DB9, 2m cable |
|
CM7 |
Interface Cable DB9M - RJ45 8W - Kingfisher RTU |
|
CM10 |
HD15 Logger Comms Cable - CDMA |
|
CM11 |
HD15 Logger Comms Cable - M1306 |
|
CM12 |
HD15 Logger Comms Cable - MM5100 |
|
CM13 |
HD15 Logger Comms Cable - GT47 |
|
CBEXRB |
Cable Regulator to Battery |
|
CBEXRI |
Cable Regulator to Data Bus |
|
CBEXIB |
Cable Battery to I/Face Bus |
|
CBEXSL |
Cable Battery to D/Logger |
|
CBEXSP |
Cable Battery to Solar Panel |
|
CBEX01 |
Cable Extension 1M - 4Core C3CF to C3CM |
|
CBEX02 |
Cable Extension 2M - 4Core C3CF to C3CM |
|
CBEX05 |
Cable Extension 5M - 4Core C3CF to C3CM |
|
CBEX10 |
Cable Extension 10M - 4Core C3CF to C3CM |
|
CBEX15 |
Cable Extension 15M - 4Core C3CF to C3CM |
|
CBEX20 |
Cable Extension 20M - 4Core C3CF to C3CM |
|
CBEX25 |
Cable Extension 25M - 4Core C3CF to C3CM |
|
CBEX30 |
Cable Extension 30M - 4Core C3CF to C3CM |
|
CBEX40 |
Cable Extension 40M - 4Core C3CF to C3CM |
|
CBEX50 |
Cable Extension 50M - 4Core C3CF to C3CM |
|
CBEX75 |
Cable Extension 75M - 4Core C3CF to C3CM |
|
CBEX100 |
Cable Extension 100M - 4Core C3CF to C3CM |
|
CBEX03 |
Cable Extension 6M - 3Core C3CF to C3CM |
|
CBEX11 |
Cable Extension 10M - 3Core C3CF to C3CM |
|
CBEX12 |
Cable Extension 25M - 3Core C3CF to C3CM |
|
024008 |
HCG003 - 3 Core Cable per metre |
|
024011 |
HCG304 - 4 Core Cable per metre |
|
024013 |
HCG306 - 6 Core Cable per metre |
|
024016 |
HCY407 - 8 Core Vented Cable per metre |